Equipment
Winches
Benthic Solutions (BSL) owns and operates a range of hydraulic and electric winches designed for shallow, deep and ultra-deep-water survey operations. Our winches support a variety of applications, including seabed sampling, coring, camera deployment and sonar surveys, and can be supplied independently or alongside our Launch and Recovery Systems (LARS).
Winch selection is tailored to the specific survey requirements, taking into consideration the deployed equipment, cable type and length, operating depth, vessel power supply and deck handling arrangements. BSL can provide technical guidance to identify the most suitable configuration for each project.
Equipment in this category
Electric Winch 1 – Camera or Light Sampling
Two-speed electric winch for cameras, sonar and lightweight seabed sampling, with local or remote push-button control. Available with armoured coaxial cable and an eight-conductor slip ring, or Dyneema rope for sampling.
- Drum capacity: up to 2 km of 9 mm cable
- Line pull: Max 630 kg
- Electrical supply: 415 VAC, 50 Hz, 20 A
Electric Winch 2 – Camera or Light Sampling
A versatile electric winch capable of holding over 2Km of 10mm rope or coaxial cable. The winch is fitted with a slip ring enabling other cable configurations. With a line pull of approximately 1000kg the winch can be controlled locally or via remote making it ideal for seabed sampling or camera operations. With a relatively small footprint and power requirements make it an ideal choice for smaller boat operations.
- Drum capacity: 3200m of 8 mm rope or cable,
- Line pull: 600 kg
- Maximum haul-in speed: 35 m/min
- Electrical supply: 380-440 VAC, 50/60Hz 9.0kw
Electric Winch 3 – Camera or Light Sampling
A versatile electric winch capable of holding over 600m of 8mm rope or coaxial cable. The winch is fitted with a slip rings enabling other cable configurations. With a line pull of approximately 200kg the winch can be controlled locally or via remote making it ideal for camera operations. With a relatively small footprint and power requirements make it an ideal choice for smaller boat operations.
- Drum Capacity: 600m of 8mm rope or cable
- Line pull: 150 kg
- Maximum line speed: 60 m/min
- Electrical supply: 440VAC, 50/60Hz, 7.5kw (20A)
Electric Winch 4 – Heave Compensated
Electric winch for steady deployment of towed equipment, including camera and sidescan sonar transects. Consider it for towing tasks where controlled deployment is needed.
- Drum Capacity: 2200m of 8mm rope or cable
- Line pull: 230 kg
- Maximum line speed: 30 m/min
- Electrical supply: single-phase, 240 VAC, 50/60Hz, 3.0kW
Electric Winch 5 – Nearshore
Compact electric winch for shallow-water and nearshore sampling or camera deployments where single-phase power is available. Can be supplied with rope or sonar cable.
- Drum Capacity: 180m of 8mm rope or cable,
- Line Pull: 200 kg,
- Winch weight: 300 kg,
- Electrical supply: 240VAC, 3.8kW
Hydraulic Winch 1 – Deep Water Camera or Sampling
RAPP Hydema hydraulic winch for rapid deep-water sampling, coring, cameras and sonar. Supplied with armoured coaxial cable or rope, with local variable-speed control, LCD remote and a line-pull/line-out computer.
- Drum capacity: up to 5 km of 11 mm cable
- Line pull: 5,000 kg
- Maximum haul-in speed: 130 m/min
- Electrical supply: 380-440VAC, 50/60 Hz, 65kW (200 A)
Hydraulic Winch 2 – Deep Water Camera or Sampling
Hydraulic winch for rapid deep-water sampling, coring and camera operations. Its 55 kW hydraulic power unit is integrated into a compact deployment frame. Available with either armoured coaxial cable or Dyneema ropecan be supplied.
- Drum Capcity: 3500m of 8mm rope or cable,
- Line pull: 3,000 kg,
- Maximum haul-in speed: 80 m/min,
- Electrical supply: 380–440 VAC, 50/60Hz,
- Hydraulic power unit: integrated, 55 kW for use with external hydraulic units such as LARS.
Hydraulic Winch 3 – Deep Water Camera or Sampling
Ultra-deep-water winch for water sampling, benthic sampling and underwater cameras, supplied with sonar cable or Dyneema. Discuss the hydraulic power unit arrangement with BSL before mobilisation.
- Drum capacity: 9000m of 11 mm rope or cable,
- Line pull: 3,600 kg
- Maximum haul-in speed: 90 m/min
- Hydraulic power unit: 75 kW
- Electrical supply: 380-440 VAC, 50/60Hz
Hydraulic Winch 4 – Deep Water Sampling only
This sampling winch was constructed specifically for deep water sampling operations. The unit requires a seperate hydraulic power unit (HPU5). Both the winch and HPU are housed within a compact deployment frames with four point wire sling harness for ease of mobilisation. The base of the frame is fitted with 4 sacrificial plates for sea fastening.
The winch has a line pull of 2000kg on the drum core and has a line speed of up to 60m/min, perfect for operations in a 2km water depth.
- Drum capacity:10,000m of 11 mm rope,
- Line pull: 2,000 kg
- Maximum haul-in speed: 76 m/min
- HPU requirement: 90LPM @ 300Bar max (HPU5)
Hydraulic Winch 5 – Heavy Lift Sampling Only
This sampling winch was constructed specifically for deep water sampling operations. The unit requires its own self-contained hydraulic power unit (HPU5). Both the winch and HPU are housed within a compact deployment frame with four point wire sling harness for ease of mobilisation. The base of the frame is fitted with 4 sacrificial plates for sea fastening.
- Drum capacity:1,000m of 10 mm rope,
- Line pull: 4,000 kg
- Maximum haul-in speed: 90 m/min
- HPU requirement: 140LPM @ 300Bar (HPU5)
Cable Counter Block – Small
The C-MAX CM2 Counting Pulleys are designed primarily to measure the deployed depths/lengths for sidescan sonar tow cables and oceanographic equipment deployments. The pulley has a circumference of 1.0m. Rotations are counted by the sensor unit by the passing of a peripheral magnets. The pulley is opened to allow the cable to be fitted or removed by releasing the axle clip, then depressing the axle lever and swinging up the arm on which the axle clip is fitted.
The sensor unit is connected to the user’s PC via a 10 metre RS232 interface. Counting pulley display software allows the current reading to be displayed in a window on any standard PC.
Lifting Equipment
BSL have keep a large number of different lifting equipment all ranging in size from 0.5 Ton to 8 Ton.
- Snatch Blocks – One side opens to allow for easy insertion of ropes,
- Sheave Blocks – also known as a pulley or snatch block,
- Trawl Block – wide mouth sheave block,
- Shackles,
- Swivels,
- Quick Release units.
Discuss your winch requirements
Send us the deployment depth, equipment weight, cable requirements, vessel power supply and proposed dates. We can discuss the available configurations and the technical information needed for mobilisation.